Time to check Derun led news .
In last article, we learn the base information of 2.4g led controller , now let’s see the Controller Instruction for Use:
- Antenna: 2.4G remote control signal receiving antenna;
- Function: on/off and mode key, long press the button, you can turn on/off the output of controller, short press the button, you can switch the mode;
- Match: match code key, refer to 4 for use methods; clear code, in the process of using controller, if you no longer want to use the remote control that already code, then you can achive it by clearingcode, methods of operation: controller is powered off, press and hold “Match” key, then power on, test it with remote control, if you could not control with the remote control, indicates the operation is successful, otherwise repeat this operation.
- DIP: as shown in Figure 3. It is used for matching four groups of address codes of the controller.
- Power: power indicator, it lights when connected with external power supply;
- Signal: RF signal indicator, it flashes when receiving correct remote control signal;
- Input/ Output interface: the controller power supply input andload output port, please refer to Figure 4 and Table 1 for detailed description.
We will continue to learn something aboutthe controller Match code and Operating Instructions tomorrow .
