Features:
1. With 4-wire input and output: data, clock, GND, anode, built-in ic, dual signal.
2. It supports resumable transmission at breakpoints, and the damage of a single lamp bead will not affect the following lamp bead.
3. The LED uses high-lumen LED chips, and the refresh date is 400 cycles. Therefore, the LED strip can accept a large amount of data from the controller, can smoothly change the color without flickering, and can also maintain a high brightness.
4. Data and clock technology are characterized by fast signal transmission and good stability.
5. Suitable for LED display or screen to display animation video with high resolution.
6. Fast signal transmission refresh rate: 30M/bit.
Product name | SK9822 DC5V Addressable RGB LED Strip Lights |
Part number | DR-SK9822FX60-5RGB |
Power(W) | 14.4W/M |
Input voltage | DC5V |
Led quantity | 60leds/M |
IC model | SK9822 (similar to APA102) |
IC type | Built-in type |
IC quantity | 60IC/M |
Working current | 0.048A/segment 2.88A/m |
LED chip | SMD5050 |
LED color | RGB |
Circuit board type | double layer FPCB (flexible soft board) |
Packaging | aluminum foil bag anti-static packaging |
Weight per plate | 240g (drop glue) 100g (bare board) 200g (sleeve) |
Working temperature | -40℃ ~ 60℃ |
Storage temperature | -50℃ ~ 80℃ |
Greyscale | 256 |
Bits/color | 8-bits/color;32bit for RGBW |
PCB width | 10mm |
Working hours | 50000 hours |
Length | 5000mm (16.4ft) per roll |
Standard connector | 4PIN terminal to connector |
Waterproof ratings | IP20 / IP67 |
Tape | 3M 300LSE tape on the back |
Packing | 5m/roll |
Certification | CE, ROHS |
Warranty | 2 years |
The Data and clock technology are characterized by fast signal transmission and good stability.