WS2813 DC5V 30LEDs/m Addressable RGB LED Strip Lights

Main feature:

One pixel damaged will not affect the other LEDs working.
Dual signal wires version, the signal can jump to transfer.

1) This product is a full-color single-point externally controlled flexible light strip, and every light bead is a pixel.

2) With high brightness, it can achieve the effects of full-color flowing water, meteor tail-chasing, chasing, advertising words, animation, video, scanning, etc.

3) Widely used in hotels, KTV, and other interior decoration.

4) Up to 5 meters can be connected in series, super series connection is strictly prohibited.

5) The thickness of the power cord should be determined according to the actual possible maximum current, product power, wiring length (recommended no more than 5 meters), and the voltage drop of the low-voltage transmission line.

Product parameters

The difference between the WS2815 and WS2813:

1. LED Chip type:

WS2815——WS2815 IC
WS2813——WS2813 IC

2. The problem with voltage drop:

WS2815 No voltage drop
WS2813 need to add DC5V voltage every 5m

3. Normal operating voltage:

WS2813 Working with DC5V
WS2815 Working with DC12V

Feature:

LED Light Source: WS2813 LED/WS2815LED
( Same Protocol as WS2811S But With Dual-Signal Wires, So Can Be Controlled by the Same WS2811/ws2812 Controllers)
Input Voltage: DC5V WS2813 / DC12V WS2815.
LED: Each LED is separately controlled
IC: (1 IC drives 1 led chip)
Cuttable: Every LED is cuttable
Grey Scale: 256
Bits/Color: 8-Bits/Color
Colors: Full-color RGB, dream color changing
FPC Color: Black/ White
Pixels: 30Leds/60Leds/144Leds/m
Working Temperature: -40 – 70 °C
Storage Temperature: -50 – 80 °C
Source Life: 50,000 hours
Connector: 4PIN connector terminal pair (Red: 5V power, Green: Dateline, Blue: standby dateline, Black: GND)